Olivetti d-Copia 16W Manuel d'utilisateur télécharger pdf (Page 51)

MISFEED REMOVAL

When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine

will automatically stop.

Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.

MISFEED IN THE SPF

Remove the misfed original.

Check sections A, B, and

C in the left shows the

illustration (see the next

page), and remove the

misfed original.

Section A

Open the feeding roller cover and remove the

misfed original from the document feeder tray.

Close the feeding roller cover.

Section B

Open the SPF and rotate the two release rollers

in the direction of the arrow to feed the original

out. Close the SPF and then remove the

original.

If a small original (A5 (5-1/2" x 8-1/2"), etc.) is

misfed, open the right side cover and remove

the original. Close the right side cover.

The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the

machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the

surface of the drum will cause dirty copies.

Note

(p.47)

(p.48)

(p.52)

d-Copia 20W

(p.47)

(p.48)

d-Copia 16W

Feeding roller cover

Roller

Right side cover

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Pas de commentaire

Olivetti d-Copia 16W Manuel d'utilisateur Page 51